Tag Archives: kazmi elecom

HIKVISION DS-7108NI-Q1-M NVR

HIKVISION DS-7108NI-Q1-M NVR backup file is posted here in this post for the support of technicians to recover or repair DVR/NVR. In most of the cases video recorder is stuck on the startup or logo screen and does not completely boot due to software malfunctioning or bios problems and in some other cases, DVR/NVR may not power on or have no display but only on standby/red ligh. In such cases, there may be a software issue or hardware issue. So, first of all, if the video recorder is on standby/red light only then check the core voltage and ensure that all measurements are perfect and the main system IC is also normal then load the backup file.

HIKVISION DS-7108NI-Q1-M NVR backup is saved from working DVR/NVR. Be careful when writing backup files. Make sure that the main board or chassis are same as you require and if possible verify the main processor. You should first keep the backup of old software and then write another. Always check the software backup size and flash memory size which will be the same in size. DVR/NVR channel capacity may be different in some cases but the main board and processor are the same. In these cases, you can write a backup file if there is no other option.

Technical Specifications of HIKVISION DS-7108NI-Q1-M NVR:

Manufacturer/Make/Brand Name:

DVR/NVR Model:

Chassis/Main Board:

Chipset/System IC/Processor:

Channel/Ports:

Software Version:

SPI Flash Memory:

Note: The following firmware is a backup file and can be written by a programming tool or can be loaded by a loader tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download your required DVR/NVR backup firmware/software and then extract it you will get the folder. Now copy the files to USB or load them with a programmer. For more Details about the download process watch the video Click Here

HIKVISION DS-7108NI-Q1-M NVR Software Backup File Free Download.

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

ECON EX-32HT008B LED TV

ECON EX-32HT008B is a 32 inches HD Ready LED TV with a resolution of 1366×768. EX-32HT008B is a non-smart tv. EX-32HT008B led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is horizontal: 170 degrees and vertical: 160 degrees. EX-32HT008B has additional edge led technology, smart power saving, ECON noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. ECON Software file is given below for the technician’s support. For more ECON Software collection visit here.

General Specifications & Features:

Make: ECON

Model: EX-32HT008B

Display Size: “32

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board: TP.MS3663T.PB751

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

For video tutorials, visit “Kazmi Elecom” my youtube channel.

DEXP H19D7100 LED TV

DEXP H19D7100 is a 19 inches HD Ready LED TV with a resolution of 1366×768. H19D7100 is a non-smart tv. H19D7100 led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is horizontal: 170 degrees and vertical: 160 degrees. H19D7100 has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. DEXP Software file is given below for the technician’s support. For more DEXP Software collection visit here.

General Specifications & Features:

Make: DEXP

Model: H19D7100

Display Size: “19

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board: TE.S512.EA67

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

• DEXP H19D7100 Software Free Download

For video tutorials, visit “Kazmi Elecom” on my YouTube channel.

5800-A6M36T-0P00 LED TV Board

5800-A6M36T-0P00 is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets. This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required seperatley but ATV Card is builtin into this motherboard.

This board has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. 5800_A6M36T_0P00 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: 5800-A6M36T-0P00

Main Chip:

Product: LED TV

LED Backlight: mA

Flash IC: Mb

Sound Chip:

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.

5800-A6M36T-0P00 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

ECON EX-40FT008B LED TV

ECON EX-40FT008B is a 40 inches HD Ready LED TV with a resolution of 1366×768. EX-40FT008B is a non-smart tv. EX-40FT008B led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is horizontal: 170 degrees and vertical: 160 degrees. EX-40FT008B has additional edge led technology, smart power saving, ECON noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. ECON Software file is given below for the technician’s support. For more ECON Software collection visit here.

General Specifications & Features:

Make: ECON

Model: EX-40FT008B

Display Size: “40

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board: CV512H-U42

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

For video tutorials, visit “Kazmi Elecom” my youtube channel.

CV181H-B LED TV Board

CV181H-B is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets. This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required seperatley but ATV Card is builtin into this motherboard.

This board has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. CV181H_B firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: CV181H-B

Main Chip:

Product: LED TV

LED Backlight: mA

Flash IC: Mb

Sound Chip:

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.

CV181H-B firmware for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

DEXP F49D7000C LED TV

DEXP F49D7000C is a 49-inch Full HD LED TV with a resolution of 1920×1080. F49D7000C is a non-smart TV. F49D7000C led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is horizontal: 170 degrees and vertical: 160 degrees. F49D7000C has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. DEXP Software file is given below for the technician’s support. For more DEXP Software collection visit here.

General Specifications & Features:

Make: DEXP

Model: F49D7000C

Display Size: “49

Storage Memory: MB

HD Technology: FHD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board: JUC7.820.00205337 HLS80JS

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

• DEXP F49D7000C Software Free Download

For video tutorials, visit “Kazmi Elecom” on my YouTube channel.

5800-A6M34G-0P00 LED TV Board

5800-A6M34G-0P00 is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets. This is a Combo Board. The main power module and LED Backlight Inverter Circuit module are required seperatley but ATV Card is builtin into this motherboard.

This board has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. 5800_A6M34G_0P00 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: 5800-A6M34G-0P00

Main Chip:

Product: LED TV

LED Backlight: mA

Flash IC: Mb

Sound Chip:

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.

5800-A6M34G-0P00 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

DEXP 42A8200 LED TV

DEXP 42A8200 is a 42 inches HD Ready LED TV with a resolution of 1366×768. 42A8200 is a non-smart tv. 42A8200 led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is horizontal: 170 degrees and vertical: 160 degrees. 42A8200 has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. DEXP Software file is given below for the technician’s support. For more DEXP Software collection visit here.

General Specifications & Features:

Make: DEXP

Model: 42A8200

Display Size: “42

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board: 35019017

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

For video tutorials, visit “Kazmi Elecom” my youtube channel.

T.MS6308.801 Firmware

T.MS6308.801 is a simple ATV Driver Motherboard intended for LCD/LED TVs. It is designed to support Full HD LCD/LED Panel Screens. This is a Non-Combo Board. For complete setup, the power input module and LED Backlight Inverter driver Circuit module are required separately but ATV Card is built into this motherboard. This board has all the features and connectivity ports as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart (optional).

Its dual USB interface is useable for user convenience to play multimedia files of his own choice and software upgrade purposes. It can also support Earphone output. T.MS6308.801 is a Full HD-supported LCD LED TV controller board with a maximum resolution of 1920×1080. It can be installed for 32 to 42-inch FHD and HD panel screens. The main processor is made by Mstar and its graphics are also good. T.MS6308.801 firmware files are given below for the technician’s support.

General Specifications:

Model: T.MS6308.801

Resolution: 1920×1080

Panel: v500hj1-pe8

Flash: Nand Flash

Firmware Type: USB Upgrade

Firmware Name: AllUpgrade_6308RTEC.bin

Product: Bush, Polaroid

Service Code:

Source/Input

Caution: 

All the pictures and specification details related to T.MS6308.801 in this post is for reference only. If you are a user and do not have any experience of repairing then it is better to visit the nearest technician first without loading the software/firmware. Sometimes, the fault is different as per the visual observations. So, please do not try it at home.

Note: The following firmware is USB bootable and a backup file that can be loaded by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first. Always keep a backup before writing the flash.

How to Download:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here

T.MS6308.801 firmware for free download:

• T.MS6308.801-V500HJ1-PE8-Firmware