Tag Archives: kazmi elecom

T.R67.03 V10 Universal Board

T.R67.03 V10 is a universal small jumper board with multi-resolution remote control switching software.

Basic Info:

Model No. T.R67.03-V10

Main Chipset: UTS6710-X

Display Format: up to 1920×1080

Aspect Ratio: 4:3, 16:9 & 16:10

SPI Flash: 25Q32 (4 MB)

Tuner: 5160

Sound: CD1517CP

Bin Name: YDG.6710.bin, YDG_6710.code.bin

Multi-Resolution Codes

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software into FAT32 USB Disk
2. Plugin the U disk into the Mainboard USB port of the LCD/LED TV
3. Switch ON the power and Wait until even the IR indicator led stops flashing
4. Done. Unplug the U-disk (It will take a max half min to upgrade firmware)

Factory Service Mode:

Menu+1147 & Source/Input+208

Multi-Resolution Code:

• INPUT/SOURCE 03661 FOR 1920X1080
• INPUT/SOURCE 03662 FOR 1366X768
• INPUT/SOURCE 03663 FOR 1280X1024
• INPUT/SOURCE 03664 FOR 1440X900
• INPUT/SOURCE 03665 FOR 1600X900
• INPUT/SOURCE 03666 FOR 1680X1050
• INPUT/SOURCE 03667 FOR 1024X768

T.R67.03 V10 Firmware All resolutions Free Download:

P150-2851AV8.1 UHD Smart Board

P150-2851AV8.1 is a digital smart UHD LED TV controller driver board. It supports resolutions up to 3840×2160 4K Ultra High Definition 2160 Pixels and is HDR10 supported. This is a Combo three-in-one network Android smart board. The main input power supply module, Sound Card circuit, Cable TV tuner, and LED backlight inverter circuit module are built into a single piece of printed circuit board (PCB). The ROM storage capacity is 16GB (EMMC Nand Flash ) which is enough for the user to install TV applications.

P150-2851AV8.1 is a universal smart motherboard that has all the necessary input and output ports for the user. It has 1 cable TV port for the antenna, 1 for SPDIF sound, 1 for network connection (LAN), and 2 USB 2.0 ports for connecting external storage, playing multimedia, and software upgrades. It has 3 HDMI ports (one of them supports ARC) by which users can connect digital devices such as Blu-ray media players, gaming consoles, PlayStations, STBs, etc. It has a headphones port and 1 for the AV input.

P150-2851AV8.1 General Information:

Board Model: P150-2851AV8.1

Main Chipset:

CPU: Quad-Core ARM Cortex-A53 64-bit

GPU: Mali-450 MP3

Android Version: Android

Resolution: 3840×2160

Audio Power: 2x10W (20 watt 8 ohm)

Backlight Volt: 90-102V

Backlight Current: 570mA

Backlight Power: 180W2

USB Ports: 2

HDMI Ports: 3

CI: No

Component: Yes

RJ45: Yes

Digital Tuner: ISDB-T

Wifi: Yes

Mira-Cast: Yes

Memory (RAM): 1.5/2GB DRAM

Storage (ROM): 16 GB EMMC Flash

Power Rating: 100V~240V 50Hz

Power Consumption: 105Watt

Firmware Name:

Firmware Type: EMMC Backup Dump

Product User: TELSTAR

P150-2851AV8.1 Technical Specifications:

• Resolution 4K UHD 2160P 3840×2160
• HD support HD
• LED backlight DLEDD
• Response time 8 ms
• Display scale 16:09
• Stereo sound there is / there is
• Matrix type LED
• Refresh rate 60 Hz
• Processor frame 64-bit ARM Cortex-A53 Quad-Core
• GPU Mali-450 MP3
• OS version Android
• RAM (DRAM) 1.5/2GB
• ROM (Flash) 16GB
• WIFI 2.4GHz / 5GHz
• HDMI 2.0 (HDCP 2.2) 2
• HDMI CEC (T-link) Full
• Caption (Subtitle) Yes
• Game mode Yes
• Bluetooth SBC / 4.2
• Sleep Timer Yes
• HDMI quick switch Yes
• DLNA 1.5 Yes
• USB HID support Yes
• USB channel list clone Yes
• USB 2.0 2
• Teletext there is
• ATV PAL/NTSC
• Sound power 10w+10w
• Acoustic system Buffer speakers
• DOLBY DIGITAL there is
• Supported formats MP3, WMA, MPEG4, MKV, JPEG
• Remote control
• Social Yes
• Web browser Yes
• Processor Quad Core
• Smart Home TCL Home, Google Home
• WiFi sharing Chromecast & T-cast
• AI Google Assistant Google Assistant Ready
• SmartTV AndroidTV

How to Write P150-2851AV8.1 EMMC Backup:

1. Download the given P150-2851AV8.1 EMMC backup is shared in this post below
2. Note the EMMC Pinouts (D0, CMD, CLK) in the given picture above
3. Jtag the mainboard with the Programming Tool
4. Write the EMMC data
5. Done.

Note: The following P150-2851AV8.1 firmware is USB bootable and a backup dump file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

P150-2851AV8.1 Firmware files for free download:

• P150-2851AV8.1-16G-TELSTAR-50-EMMC.part1
• P150-2851AV8.1-16G-TELSTAR-50-EMMC.part2

40-MT56SE-MAC2HG LED TV Board

40-MT56SE-MAC2HG is a smart LED TV motherboard. Its supported resolution is 1920×1080 Full HD 1080 Pixels. It is a Combo three-in-one driver controller board. The main power supply input module is combined with an LED backlight driver inverter module and cable TV tuners. The sound card is also built on a single PCB. Audio output with stereo dual speaker is 16 watts. Its main storage memory (ROM) is 4GB EMMC And Flash. It has a built-in WiFi system. It has dual TV tuners for analog signal reception and digital signal reception.

40-MT56SE-MAC2HG board has multiple user connectivity interfaces such as a CI+ interface and a dual HDMI input interface for connecting Digital devices such as Play Stations, Digital Cameras, Set-Top boxes, Gaming Consoles, etc. It has mini composite ports for connecting analog devices. It has dual USB input ports to connect USB devices, play multimedia files, and upgrade software. For wired internet connectivity, it has an Ethernet port (LAN) to get faster and smooth browsing.

40-MT56SE-MAC2HG General Information:

Model Name: 40-MT56SE-MAC2HG

Chassis: MT565SE

Main Chipset: MediaTek MT5655VGNJ

Software Version: V8-MT56552-LF1V

Resolution: 1920×1080

Processor: MediaTek

RAM: 512 MB

ROM: 4 GB EMMC

EMMC: Toshiba THGBMG5D1LBAIL

EEPROM: 24C32

Aspect Ratio: 16:09

Audio Power Output: 16w (8×2)

System: PAL//SECAM/NTSC

Dual Tuner: Yes

Digital Tuner: DVB-T, DVB-T2, DVB-C, DVB-S2

HDMI: 2

USB Ports: 2

VGA: No

SPDIF: No

Scart: No

CI+=Yes

LAN: Yes (RJ45)

Firmware:

Firmware Type: EMMC Backup Dump

Service Menu Code:

Menu Contrast 1950. For more Service Menu Codes visit Here.

40-MT56SE-MAC2HGTechnical Specifications:

• Manufacturer: China
• Display Type: 2K
• Screen Resolution: Full HD (1920×1080)
• SMART TV support: Yes
• Digital tuner: Yes
• Panel type: LED
• Screen format: 16:9
• Wi-Fi Connectivity: Yes
• Inputs: AV, HDMI x2, USB x2, Ethernet (RJ-45), Wi-Fi 802.11ac, CI
• Outputs: Optic
• Sound system: 2×8 W
• Dolby: Yes
• Supported formats: MPG, MPEG, MPEG2-PS, MP4, MKV, AVI, ASF, FLV, MP3, JPEG, PNG, BMP
• Operating system: Linux
• Refresh rate: 60 Hz
• Wireless data transmission: Miracast
• Contrast Ratio: 3,000,000: 1
• Response Time: 2ms
• Color System: PAL, SECAM, NTSC
• Digital Tuner: DVB-T, DVB-T2, DVB-C, DVB-S2
• TV System: PAL / NTSC
• Operating System Linux
• Component In (RGB Cable) Yes
• Composite In (Audio Video Cable) Yes
• Headphone Jack Yes
• Sound Technology Dolby Digital Decoder
• Wi-Fi Type 2.4GHz Wi-Fi 802.11 b/g/n 2T2R
• CPU Dual Core A9 896MHz
• GPU Dual Core MALI 400MHz
• RAM/ROM 768M Byte DDR3 / 4G Byte eMMC

How to Write 40-MT56SE-MAC2HG EMMC Backup:

1. Download the given 40-MT56SE-MAC2HG EMMC backup shared in this post below
2. Note the EMMC Pinouts in the given picture above
3. Jtag the mainboard with the Programming Tool
4. Write the EMMC data
5. Done.

Note: The following 40-MT56SE-MAC2HG firmware is USB bootable and a backup dump file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

40-MT56SE-MAC2HG Firmware files for free download:

• 40-MT56SE-MAC2HG-4G-SHIVAKI STV-32-EMMC.part1
• 40-MT56SE-MAC2HG-4G-SHIVAKI STV-32-EMMC.part2

T.MS6586.U783 UHD Smart Board

T.MS6586.U783 is a UHD smart Android LED TV Board. It can support HDR10. The maximum resolution of this board is 3840×2160 4K Ultra High Definition 2160 Pixel. This board is best suitable for UHD panel screens 48-inch to 65-inch in size. T-MS6586-U783 has dual tuner options one for analog TV signal reception and the other one for Digital Satellite Signals reception. This is a non-combo board. The LED backlight driver module and the main input power supply module will be installed separately with this board. The sound card and the cable TV tuners are built into the motherboard.

T.MS6586.U783 universal LED TV motherboard has multiple connectivity input and output interface ports for the user’s convenience. It has dual USB input ports for software upgrade purposes and for playing multimedia (Image, Movie, Audio, and Video). It has three HDMI input ports to connect high-definition digital devices such as Gaming consoles, set-top boxes, Blu-ray Players, PlayStations, etc. It has also a mini composite input port for connecting Analog devices. T-MS6586-U783 board has a Local Area Network ethernet interface for Fast and smooth internet connectivity.

T.MS6586.U783 General Information:

Board Model: T.MS6586.U783-1MS586B2S2A

Main Chipset: MS586

CPU: Dual-Core

GPU: Mali-450

Android Version:

Resolution: 3840×2160

Audio Power: 2x10W (20 watt 8 ohm)

Backlight Volt: 90-102V

Backlight Current: NA

Backlight Power: NA

USB Ports: 2

HDMI Ports: 3

CI: Yes

Component: Yes

RJ45: Yes

Tuner: ATV and DTV (R842, RT710)

Wifi: Yes

Mira-Cast: Yes

Memory (RAM): 512MB DRAM

Storage (ROM): 4 GB EMMC Flash

Power Rating: 110V~240V 50Hz

Power Consumption: 105Watt

Firmware Name:

Firmware Type: EMMC Backup Dump

Product User: DORA

T.MS6586.U783 Technical Specifications:

• Resolution 4K UHD 2160P 3840×2160
• HD support HD
• LED backlight DLEDD
• Response time 8 ms
• Display scale 16:09
• Stereo sound there is / there is
• Matrix type LED
• Refresh rate 60 Hz
• Processor frame 64-bit ARM Cortex-A53 Quad-Core
• GPU Mali-450 MP3
• OS version Android
• RAM (DRAM) 512MB
• ROM (Flash) 4GB
• WIFI 2.4GHz / 5GHz
• HDMI 2.0 (HDCP 2.2) 2
• HDMI CEC (T-link) Full
• Caption (Subtitle) Yes
• Game mode Yes
• Bluetooth SBC / 4.2
• Sleep Timer Yes
• HDMI quick switch Yes
• DLNA 1.5 Yes
• USB HID support Yes
• USB channel list clone Yes
• USB 2.0 2
• Teletext there is
• ATV PAL/NTSC
• Sound power 10w+10w
• Acoustic system Buffer speakers
• DOLBY DIGITAL there is
• Supported formats MP3, WMA, MPEG4, MKV, JPEG
• Built-in Receiver
• Social Yes (YouTube, Netflix)
• Processor Quad Core
• Smart Apps Netflix, YouTube
• SmartTV

How to Write T.MS6586.U783 EMMC Backup:

1. Download the given T.MS6586.U783 EMMC backup is shared in this post below
2. Note the EMMC Pinouts (D0, CMD, CLK) in the given picture above
3. Jtag the mainboard with the Programming Tool
4. Write the EMMC data
5. Done.

Note: The following T.MS6586.U783 firmware is USB bootable and a backup dump file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

T.MS6586.U783 Firmware files for free download:

• T.MS6586.U783-3840×2160-4G-DORA-55-EMMC.part1
• T.MS6586.U783-3840×2160-4G-DORA-55-EMMC.part2

TPD.T960X.PC792 Smart LED TV Board

TPD.T960X.PC792 is an Ultra High Definition Android Smart LED TV board. Its maximum supported resolution is 4K (3840×2160) 2160 Pixels Ultra HD. This board is a three-in-one board that is also called a combo board. The main input power supply (100-240V 50/60Hz) circuit module is built with a cable TV tuner and LED backlight inverter driver circuit on a single piece of printed circuit board (PCB). AmLogic makes the main processor (64-bit Quad-Core CPU) used in this mainboard. The RAM capacity of this board is 1/2 GB and the ROM capacity is 8 GB (EMMC Flash). This board is suitable for 43-inch UHD screen panels. The refresh rate is 60 HZ.

TPD.T960X.PC792 board has multiple ports such as an Ethernet port (RJ45) for wired internet connectivity to get smooth and fast internet response. It has SPDIF and Headphones Output ports. This board has three (triple) HDMI input interface ports for the user’s convenience to connect multiple full HD digital devices with this board at the same time such as gaming consoles, Set-top boxes, Blu-ray media players, etc. It has also dual USB input ports for connecting external hard disk drives and playing multimedia files. This board has a component input interface to connect analog devices. Total Sound output power is 20 watts with dual speaker.

The special features embedded into the software of this board are integrated WiFi, Bluetooth 4.2 connectivity, Google Voice Assistant, Kids Mode With Parental Lock, Universal Search, Language Universe, User Centre, Built-In Speaker, Chromecast, etc.

TPD.T960X.PC792 General Information:

Board Model: TPD.T960X.PC792

Main Chipset: AMLOGIC T960

CPU: Quad-Core ARM Cortex-A53 64-bit

GPU: Mali-450 MP3

Android Version: Android 9.0

Resolution: 3840×2160

Audio Power: 2x10W (20 watt 8 ohm)

Backlight Volt: 90-102V

Backlight Current: 570mA

Backlight Power: 180W2

USB Ports: 2

HDMI Ports: 3

CI: No

Component: Yes

RJ45: Yes

Tuner: NTSC/PAL

Wifi: Yes

Mira-Cast: Yes

Memory (RAM): 1/2GB DRAM

Storage (ROM): 8 GB EMMC Flash

Power Rating: 100V~240V 50Hz

Power Consumption: 105Watt

Firmware Name:

Firmware Type: EMMC Backup Dump

Product User: MI

TPD.T960X.PC792 Technical Specifications:

• Resolution 4K UHD 2160P 3840×2160
• HD support HD
• LED backlight DLEDD
• Response time 8 ms
• Display scale 16:09
• Stereo sound there is / there is
• Matrix type LED
• Refresh rate 60 Hz
• Processor frame 64-bit ARM Cortex-A53 Quad-Core
• GPU Mali-450 MP3
• OS version Android 9.0
• RAM (DRAM) 1GB
• ROM (Flash) 8GB
• WIFI 2.4GHz / 5GHz
• HDMI 2.0 (HDCP 2.2) 2
• HDMI CEC (T-link) Full
• Caption (Subtitle) Yes
• Game mode Yes
• Bluetooth SBC / 4.2
• Sleep Timer Yes
• HDMI quick switch Yes
• DLNA 1.5 Yes
• USB HID support Yes
• USB channel list clone Yes
• USB 2.0 2
• Teletext there is
• ATV PAL/NTSC
• Sound power 10w+10w
• Acoustic system Buffer speakers
• DOLBY DIGITAL there is
• Supported formats MP3, WMA, MPEG4, MKV, JPEG
• Remote control t
• Social Yes
• Web browser Yes
• Processor Quad Core
• Smart Home TCL Home, Google Home
• WiFi sharing Chromecast & T-cast
• AI Google Assistant Google Assistant Ready
• SmartTV AndroidTV
• HbbTV 2.0.2

How to Write TPD.T960X.PC792 EMMC Backup:

1. Download the given TPD.T960X.PC792 EMMC backup is shared in this post below
2. Note the EMMC Pinouts (D0, CMD, CLK) in the given picture above
3. Jtag the mainboard with the Programming Tool
4. Write the EMMC data
5. Done.

Note: The following TPD.T960X.PC792 firmware is USB bootable and a backup dump file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

TPD.T960X.PC792 Firmware files for free download:

• TPD.T960X.PC792-8G-MI-L43M4-4AIN-EMMC.part1
• TPD.T960X.PC792-8G-MI-L43M4-4AIN-EMMC.part2
• TPD.T960X.PC792-8G-MI-L43M4-4AIN-EMMC.part3

5800-A7M42G-0P00 FHD Smart Board

5800-A7M42G-0P00 is a smart network LCD LED TV driver controller board. The maximum supported resolution of this board is 1080P 1920×1080 Full HD. The main processor (CPU) used in this board is made by Mstar (MSD6683). The picture quality and the sound quality of the 5800.A7M42G.0P00 board is very excellent. The total sound output is 12 watts, and the dual stereo sound output speaker system is 6 watts each. The RAM of this board is 1 GB and the ROM storage capacity is up to 8 GB (EMMC Flash). 5800.A7M42G.0P00 is best suited for 32-inch to 43-inch LCD LED TV screen panels.

5800-A7M42G-0P00 is a three-in-one LCD LED TV motherboard that is also called a combo board. The 5800.A7M42G.0P00 combo board has the built-in power input supply circuit, the cable TV tuner, and the LED backlight inverter circuit on a single printed circuit board. This board has multiple user connectivity interfaces to connect different devices at a time. It has two USB ports for connecting USB devices, external hard disk drives, and software upgrades. For connecting Full High Definition digital devices, it has the option of dual HDMI inputs. The user can connect several devices at a time with this board.

5800-A7M42G-0P00 General Information:

Board Model: 5800-A7M42G-0P00 VER00.05 2019-02-15

Main Chipset: MSD6683 (MSD6683BQHAT-8-00FR)

CPU: Quad-Core ARM Cortex-A53

GPU: Dual-Core G52MP2

Operating System: Smart

Resolution: 1920×1080

Audio Power: 2x6W (12 watts)

Backlight Current: 380-620 mA

Backlight Voltage Range: 40-114 Volt

USB Ports: 2

HDMI Ports: 2

CI: No

Component: Yes

RJ45: Yes

Analog Tuner: PAL, SECAM, NTSC

Digital Tuner: DVB-T, DVB-T2, DVB-C, DVB-S, DVB-S2

Wifi: Yes

Mira-Cast: Yes

Memory (RAM): 1GB DRAM

Storage (ROM): 8 GB EMMC Flash

EMMC: THGBMJG6C1LBAIL

Power Rating: 110V~240V 50/60Hz

Power Consumption: 65Watt

Firmware Name: upgrade_loader_no_tvconfig.pkg

Firmware Type: USB Bootable and EMMC Backup Dump

Product Users: Skyworth, Harper, AllView, Motorolla, Panasonic, etc

Factory Menu Code:

Enter the service menu (by clicking on the remote control “Menu”, enter the “Additional settings” item, and press the combination of numbers 3195)

5800-A7M42G-0P00 Technical Specifications:

• Resolution 1920×1080 Full HD
• HD support HD
• LED backlight DLEDD
• Response time 8 ms
• Display scale 16:09
• Stereo sound there is / there is
• Matrix type LED
• Refresh rate 60 Hz
• Processor frame ARM Cortex-A53/1, 5GHz/Quad core
• GPU G52MP2/Dual core
• OS version Smart
• RAM (DRAM) 1GB
• ROM (Flash) 8GB
• WIFI 2T2R
• HDMI 2.0 (HDCP 2.2) 2
• HDMI CEC (T-link) Full
• Caption (Subtitle) Yes
• USB HID support Yes
• USB channel list clone Yes
• USB 2.0 2
• Teletext there is
• ATV PAL, SECAM, NTSC
• DTV DVB-T, DVB-T2, DVB-C, DVB-S, DVB-S2
• Sound power 6w+6w
• Acoustic system Buffer speakers
• DOLBY DIGITAL there is
• Supported formats MP3, WMA, MPEG4, MKV, JPEG
• Social Applications Yes
• Web browser Yes
• Processor Quad Core
• WiFi sharing Yes

How to Write 5800-A7M42G-0P00 EMMC Backup:

1. Download the given 5800-A7M42G-0P00 EMMC backup shared in this post below
2. Note the EMMC Pinouts (D0, CMD, CLK) in the given picture above
3. Jtag the mainboard with the Programming Tool
4. Write the EMMC data
5. Done.

How to Install USB Bootable Firmware:

1. Download the required 5800-A7M42G-0P00 USB bootable firmware.
2. Extract the zip files to get the folder.
3. Transfer the firmware (upgrade_loader_no_tvconfig.pkg) file to the empty FAT32 formatted USB disk
4. Switch OFF the TV/Board from the main power
5. Insert the pen drive into the USB port 1 of the board
6. It will automatically boot the software, otherwise keep pressing the power key button and then switch on
7. The installation progress bar will display on the screen. Now release the power button
8. Wait till completion. Done

Note: The following 5800-A7M42G-0P00 firmware is USB bootable and a backup dump file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

5800-A7M42G-0P00 Firmware files for free download:

• 5800-A7M42G-0P00-1920×1080-8G-HARPER-EMMC.part1
• 5800.A7M42G-0P00-1920×1080-8G-HARPER-EMMC.part2
• 5800-A7M42G-0P00-1920×1080-8G-HARPER-43-USB.part1
• 5800.A7M42G-0P00-1920×1080-8G-HARPER-43-USB.part2
• 5800-A7M42G-0P00-1920×1080-8G-SKYWORTH-40-USB.part1
• 5800.A7M42G-0P00-1920×1080-8G-SKYWORTH-40-USB.part2

TPD.RT2841.PB775 Smart LED TV Board

TPD.RT2841.PB775 is a smart Android FHD motherboard for LCD and LED TVs. Its maximum supported screen resolution is 1920×1080 Full High Definition 1080 Pixels. This is a Combo three-in-one motherboard that is built with the main power input circuit and the backlight inverter driver circuit with a cable TV tuner on a single piece of printed circuit board (PCB). This board has 8GB of storage NAND Flash memory (EMMC). Its processing speed is very fast, and its response time is excellent. The graphics quality is awesome, and the sound quality is very good with a dual stereo speaker system of 16 watts (8*2).

TPD.RT2841.PB775 has a Linux-based operating system. This board is smart and Android. The refresh rate of this board is 60 Hz. This board has a dual TV reception system. One is an Analog TV signal reception (PAL/SECAM/NTSC) and the other is a Digital TV signal (DVB-T2/C/S2) reception system. This board has some featured apps built into its software such as Netflix, YouTube, Google Play, Google Assistant, etc. It can also support the Voice function by remote control. For user convenience, this board has all the connectivity interfaces such as HDMI, USB, SPDIF, Ethernet (RJ45), Composite, etc.

TPD.RT2841.PB775 General Information:

Board Model: RT41X RTK2841 TPD.RT2841.PB775

Main Chipset: Realtek

CPU: Quad-Core ARM Cortex-A53

GPU: Dual-Core G52MP2

Android Version:

Resolution: 1920×1080

Audio Power: 2x8W (16 watt 8 ohm)

Backlight Current: NA

Backlight Power: NA

USB Ports: 1

HDMI Ports: 2

CI: Yes

Component: Yes

RJ45: Yes

Analog Tuner: PAL/SECAM/NTSC (AV) BG/DK/I/LL

Digital Tuner: DVB-T2/C/S2

Wifi: Yes

Mira-Cast: Yes

Memory (RAM): 1GB DRAM

Storage (ROM): 8 GB EMMC Flash

Power Rating: 220V~240V 50Hz

Power Consumption: 75Watt

Firmware Name:

Firmware Type: EMMC Backup Dump

Product User: TCL

TPD.RT2841.PB775 Technical Specifications:

• Resolution 1920×1080 Full HD
• HD support HD
• LED backlight DLEDD
• Response time 8 ms
• Display scale 16:09
• Stereo sound there is / there is
• Matrix type LED
• Refresh rate 60 Hz
• Processor frame ARM Cortex-A53/1, 5GHz/Quad core
• GPU G52MP2/Dual core
• OS version Android
• RAM (DRAM) 1GB
• ROM (Flash) 8GB
• WIFI 2T2R
• HDMI 2.0 (HDCP 2.2) 2
• HDMI CEC (T-link) Full
• Caption (Subtitle) Yes
• Game mode Yes
• Bluetooth SBC / 5.0
• Sleep Timer Yes
• HDMI quick switch Yes
• DLNA 1.5 Yes
• USB HID support Yes
• USB channel list clone Yes
• USB 2.0 2
• Teletext there is
• ATV PAL/SECAM/NTSC (AV) BG/DK/I/LL
• DTV DVB-T2/C/S2
• Sound power 8w+8w
• Acoustic system Buffer speakers
• DOLBY DIGITAL there is
• Supported formats MP3, WMA, MPEG4, MKV, JPEG
• Remote control type RC802NU1
• Social Yes
• Web browser Yes
• Processor Quad Core
• Smart Home TCL Home, Google Home
• WiFi sharing Chromecast & T-cast
• AI Google Assistant Google Assistant Ready
• SmartTV AndroidTV (29 languages)
• HbbTV 2.0.2

How to Write TPD.RT2841.PB775 EMMC Backup:

1. Download the given TPD.RT2841.PB775 EMMC backup shared in this post below
2. Note the EMMC Pinouts (D0, CMD, CLK) in the given picture above
3. Jtag the mainboard with the Programming Tool
4. Write the EMMC data
5. Done.

Note: The following TPD.RT2841.PB775 firmware is USB bootable and a backup dump file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

TPD.RT2841.PB775 Firmware files for free download:

• TPD.RT2841.PB775-8G-TCL-32S60-EMMC.part1
• TPD.RT2841.PB775-8G-TCL-32S60-EMMC.part2

40-NT63D1-MAB2HG FHD Smart Board

40-NT63D1-MAB2HG is a Full HD smart Android LCD LED TV Board. the maximum resolution of this board can support up to 1920×1080 Full High Definition 1080P. This is suitable for 55-inch to 65-inch LED TV Screen Panels. The refresh rate for screen panels is 60 Hz. The operating system used in this board is Linux-based. Being a smart Android board it is very intelligent and fast. The main chip is made by Novatek ( NT72563MBG-TU) with Dual-Core A9 896MHz CPU and MALI 400MHz GPU. It has 768 MB of RAM and its storage memory (ROM) capacity is 4 GB. So, its processing speed is very fast and its response time is very efficient.

40-NT63D1-MAB2HG is a non-combo board so the main power input module and the backlight driver inverter circuit module are required separately to complete the LED TV setup. It has multiple output and input connectivity interfaces to connect multiple devices at a time with it. It has triple HDMI inputs for connecting Full HD digital devices such as PlayStation, STBs, Gaming Consoles, Blu-ray media players, etc. It has also dual USB input ports for connecting external USB devices and external hard disk drives. Users can also upgrade software by USB input and can play multimedia files of their own choice.

40-NT63D1-MAB2HG General Information:

Model Name: 40-NT63D1-MAB2HG NT63E1/F1

Chassis: NT63BP1-AP

Main Chipset: NT72563MBG-TU

Software Version: V8-

Resolution: 1920×1080

Processor: NovaTek

RAM: 768 MB

ROM: 4 GB EMMC

Aspect Ratio: 16:09

Audio Power Output: 16w (8×2)

System: PAL//SECAM/NTSC

Tuner: Yes

HDMI: 3

USB Ports: 2

VGA: No

SPDIF: No

Scart: No

LAN: Yes (RJ45)

Firmware: Install.img

Firmware Type: EMMC Backup Dump

Service Menu Code:

Menu Contrast 1950. For more Service Menu Codes visit Here.

40-NT63D1-MAB2HG Technical Specifications:

• Manufacturer: China
• Display Type: 2K
• Screen Resolution: Full HD (1920×1080)
• SMART TV support: Yes
• Digital tuner: No
• Panel type: LED
• Screen format: 16:9
• Wi-Fi Connectivity: Yes
• Inputs: AV, HDMI x3, USB x2, Ethernet (RJ-45), Wi-Fi 802.11ac, CI
• Outputs: Optic
• Sound system: 2×8 W
• Dolby: Yes
• Supported formats: MPG, MPEG, MPEG2-PS, MP4, MKV, AVI, ASF, FLV, MP3, JPEG, PNG, BMP
• Operating system: Linux
• Refresh rate: 60 Hz
• Wireless data transmission: Miracast
• Contrast Ratio: 3,000,000: 1
• Response Time: 2ms
• Color System: PAL, SECAM, NTSC
• TV System: PAL / NTSC
• Operating System Linux
• Component In (RGB Cable) Yes
• Composite In (Audio Video Cable) Yes
• Headphone Jack Yes
• Sound Technology Dolby Digital Decoder
• Wi-Fi Type 2.4GHz Wi-Fi 802.11 b/g/n 2T2R
• CPU Dual Core A9 896MHz
• GPU Dual Core MALI 400MHz
• RAM/ROM 768M Byte DDR3 / 4G Byte eMMC

How to Write 40-NT63D1-MAB2HG EMMC Backup:

1. Download the given 40-NT63D1-MAB2HG EMMC backup shared in this post below
2. Note the EMMC Pinouts in the given picture above
3. Jtag the mainboard with the Programming Tool
4. Write the EMMC data
5. Done.

Note: The following 40-NT63D1-MAB2HG firmware is USB bootable and a backup dump file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

40-NT63D1-MAB2HG Firmware files for free download:

• 40-NT63D1-MAB2HG-1920×1080-4G-TCL-55S62-EMMC.part1
• 40-NT63D1-MAB2HG-1920×1080-4G-TCL-55S62-EMMC.part2

MSA3487-ZC01-01 Smart Android Board

MSA3487-ZC01-01 is a Full HD smart Android LCD LED TV controller motherboard. It has a supported resolution of 1920×1080 1080P Full High Definition. This is a three-in-one TV board which is also called a combo board. The LED backlight driver inverter module, Cable TV tuner, and the main input power supply unit are built into a single piece of motherboard printed circuit board (PCB). The user installs the motherboard with the panel there is no need to install or connect any other module. MSA3487.ZC01.01 is a universal driver board that can be installed with 24-32 inch LCD LED TV screen panels.

MSA3487-ZC01-01 is manufactured with a Mstar processor (MSD6A348). Its processing speed is breakneck. Its RAM capacity is 1 GB and its total storage (ROM) capacity is 8 GB EMMC Flash. This board is built with an Android platform version 6.0. MSA3487.ZC01.01 board can receive analog TV system signals (PAL, SECAM, NTSC) and digital tv system signals (DVB-C, DVB-S, DVB-S2, DVB-T, DVB-T2) with a dual tuner option (ATV&DTV). This board has multiple connectivity input-output interfaces for user convenience such as dual USB, dual HDMI input, Ethernet Connection (RJ45), CL+ Interface, Composite (RCA) input, etc.

MSA3487-ZC01-01 General Information:

Board Model: MSA3487-ZC01-01

Main Chipset: MSD6A348AX0-8-W2

CPU: Quad-Core ARM Cortex-A53

GPU: Dual-Core G52MP2

Android Version: 6.0

Resolution: 1920×1080

Audio Power: 2x6W (12 watts)

Backlight Current: NA

Backlight Power: NA

USB Ports: 2

HDMI Ports: 2

CI: Yes

Component: Yes

RJ45: Yes

Analog Tuner: PAL, SECAM, NTSC

Digital Tuner: DVB-C, DVB-S, DVB-S2, DVB-T, DVB-T2

Wifi: Yes

Mira-Cast: Yes

Memory (RAM): 1GB DRAM

Storage (ROM): 8 GB EMMC Flash

EMMC: KLM8G1GEME-B041

Power Rating: 220V~240V 50Hz

Power Consumption: 65Watt

Firmware Name: MstarUpgrade.bin

Firmware Type: USB Bootable and EMMC Backup Dump

Product User: Strong, China Universal

MSA3487-ZC01-01 Technical Specifications:

• Resolution 1920×1080 Full HD
• HD support HD
• LED backlight DLEDD
• Response time 8 ms
• Display scale 16:09
• Stereo sound there is / there is
• Matrix type LED
• Refresh rate 60 Hz
• Processor frame ARM Cortex-A53/1, 5GHz/Quad core
• GPU G52MP2/Dual core
• OS version Android 6.0
• RAM (DRAM) 1GB
• ROM (Flash) 8GB
• WIFI 2T2R
• HDMI 2.0 (HDCP 2.2) 3
• HDMI CEC (T-link) Full
• Caption (Subtitle) Yes
• USB HID support Yes
• USB channel list clone Yes
• USB 2.0 2
• Teletext there is
• ATV PAL, SECAM, NTSC
• DTV DVB-C, DVB-S, DVB-S2, DVB-T, DVB-T2
• Sound power 6w+6w
• Acoustic system Buffer speakers
• DOLBY DIGITAL there is
• Supported formats MP3, WMA, MPEG4, MKV, JPEG
• Social Applications Yes
• Web browser Yes
• Processor Quad Core
• WiFi sharing Yes

How to Write MSA3487-ZC01-01 EMMC Backup:

1. Download the given MSA3487-ZC01-01 EMMC backup shared in this post below
2. Note the EMMC Pinouts (D0, CMD, CLK) in the given picture above
3. Jtag the mainboard with the Programming Tool
4. Write the EMMC data
5. Done.

How to Install USB Bootable Firmware:

1. Download the required MSA3487-ZC01-01 USB bootable firmware.
2. Extract the zip files to get the folder.
3. Transfer the firmware (MstarUpgrade.bin) file to the empty FAT32 formatted USB disk
4. Switch OFF the TV/Board from the main power
5. Insert the pen drive into the USB port 1 of the board
6. It will automatically boot the software
7. The installation progress bar will display on the screen. Now release the power button
8. Wait till completion. Done

Note: The following MSA3487-ZC01-01 firmware is USB bootable and a backup dump file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

MSA3487-ZC01-01 Firmware files for free download:

• MSA3487-ZC01-01-8G-32M6000-EMMC.part1
• MSA3487.ZC01-01-8G-32M6000-EMMC.part2
• MSA3487-ZC01-01-8G-STRONG-32-EMMC.part1
• MSA3487.ZC01-01-8G-STRONG-32-EMMC.part2
• MSA3487-ZC01-01-1366×768-8G-STRONG-USB.part1
• MSA3487.ZC01-01-1366×768-8G-STRONG-USB.part2

RSG7.820.6484 LED TV Board

RSG7.820.6484 is a smart LED TV motherboard. Its maximum supported resolution is 1080P 1920×1080 Full HD. It has an inbuilt VIDAA smart operating system with more than 300 applications.  YouTube and Netflix are also inbuilt which can easily be accessible with one click through a remote control. It has 4 GB of storage memory. With a Quad-Core processor, the response speed of all functions is very speedy and outstanding. This board is a Non-Combo board. This board has all the necessary user connectivity interfaces such as LAN (RJ45), SPDIF, Component Input, Headphones Output, etc.

RSG7.820.6484 has multiple input/output user connectivity interface such as dual USB input ports that allows access to the multimedia (MP3, JPEG, etc) from USB Flash Drives and Digital Cameras to access photos, movies, and music files. Users can also connect external hard disk drives and use them for software upgrades. It has HDMI inputs supporting digital audio and video in a single connection. With three HDMI inputs, the user can connect several high-definition sources such as an HD tuner, Blu-ray players, gaming consoles or digital audio/video players, Media Players, PlayStations, etc.

RSG7.820.6484 General Information:

Board Model: RSG7.820.6484/ROH

Processor: MediaTek

CPU: 1.0GHz

GPU: Dual-Core MALI-400

Operating System: VIDAA6

Android Version: NA

Resolution: 1366×768/1920×1080

Audio Power: 2x8W (16 watt 8 ohm)

Backlight Current: NA

Backlight Power: NA

USB Ports: 2

HDMI Ports: 3

CI: No

PC Input: No

Component: Yes

RJ45: Yes

Analog Tuner: Yes

Digital Tuner: DVB

Wifi: Yes

Mira-Cast: Yes

SPDIF OUT: Yes

Memory (RAM): 512 Mb

Storage (ROM): 4 GB EMMC Flash

EMMC:

Power Rating: 100V~240V 50/60Hz

Power Consumption: 130Watt

Firmware Name: NA

Firmware Type: EMMC Backup Dump

Product User: Hisense

RSG7.820.6484 Technical Specifications:

• Operative System VIDDA6
• Browser Odin 88
• Display 1366×768 and 1920×1080
• RAM/ROM 512 MB /4G Byte ROM
• HDMI ports 2
• MHL enabled Yes
• HDMI Support MHL & ARC
• Ethernet sockets 1
• USB ports 2
• USB supports Audio, Video, Image
• Cable Port Yes
• SPDIF Yes
• A/V IN Yes
• PC Input No
• Headphone speaker output ports 1
• Refresh rate 60 Hz
• Resolution 1080P
• Image formats supported BMP, GIF, JPEG, PNG
• Analog TV reception formats PAL, NTSC, SECAM
• Video formats supported MKV, MPEG, MPEG-1, MPEG-2, MPEG-4
• Upscaling No
• Audio formats supported AAC, AC3(Dolby Digital), MP2, MP3, PCM
• Audio Features 5 Band Equalizer, Auto volume leveler: Balance, Dolby Atmos
• No. of speakers 2
• Total speaker output 16 W
• Output per speaker 8 W
• Sound type Mono
• Bluetooth Optional (not builtin)
• Processor Type Quad Core
• Screen Format 4:3 / 16:9 / Auto / Zoom 1 / Zoom 2
• Inbuilt apps Yes
• Wi-Fi Yes
• Internet Link 2.4GHz WiFi 802.11 b/g/n 2T2R, Ethernet Network
• Remote Type RF (Radio frequency)
• Miracast screen mirroring support Yes
• Voltage requirement 100 – 240V 50/60HZ
• NETFLIX: YES
• YOUTUBE: YES
• OPEN BROWSER: YES (webkit based no plugin support)
• TWITTER: YES (Opera Store based app)
• ACCUWEATHER: YES
• PICASA: YES
• OPERA STORE: YES
• GINGA: YES (ginga-ar based on NCL-Lua)
• Hisense REMOTE CONTROL APP: YES
• ANYVIEW STREAM: Yes (file sharing function over the network from cell phones, computers, etc.)
• ANYVIEW CAST: YES

How to Write RSG7.820.6484 EMMC Backup:

1. Download the given RSAG7.820.10229 EMMC backup shared in this post below
2. Note the EMMC Pinouts in the given picture above
3. Jtag the mainboard with the Programming Tool
4. Write the EMMC data
5. Done.

Note: The following RSG7.820.6484 firmware is USB bootable and a backup dump file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

RSG7.820.6484 Firmware files for free download:

• RSG7.820.6484-4GB-HISENSE-50-EMMC.part1
• RSG7.820.6484-4GB-HISENSE-50-EMMC.part2