Tag Archives: kazmi elecom

ORIENT LED TV ALL SOFTWARE

Orient LED TV is widely used in Pakistan. Every Orient LED TV has its specific program or firmware/software installed in its motherboard by which the TV functions can be operated. Sometimes, In some cases LED TV stops working due to technical reasons and is not properly displayed, or the standby light remains red/blue. The TV did not start normally so we need to reprogram the LED TV with its specific firmware/software.

It is very necessary for us to have the backup dump of that LED TV to restore the TV to normal condition. So, here are some backup dump files of Orient LED TV firmware for free Download to support the technicians. Download free Orient bin files for your LED TV. If you are facing some issues during software installation then read here first.

All following given firmware of Orient LED TV is backed up with a programming tool and can be loaded into tv with the programmer. Each LED TV Model has its own specific Software File that you can download for a specific model. It is advised to all beginners that first save the backup of the old software before installing new software or remove the original flash IC and load the software in the new flash ic then mount it. In case of any trouble, you can replace back the original flash ic to avoid any issues.

Orient LED TV boards do not have the option of Mirroring/flipping or inverting the function setting of the panel. So, if the picture is inverted or flipped then you should load the software of the upside-down picture. Some software in the given list is bifurcated and some or not. you may check it by yourself if you face such types of problems during the software installation.

In some cases, the main motherboard is the same but the channel scanning issue is observed. This is because the different tuner is mounted on the same board. So, you need to first verify the tuner ic part number to load the proper firmware.

Note: 

All software files are saved from working Orient LED TVs with the help of the Programming tool and can be loaded or written by the programmer. These firmware files may not support the USB upgrade method. If you are not a technician then do not try to update. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/Installing the firmware.

How to Download:

Download the following given firmware and extract/unzip. Now copy the file to USB. For more Detail about the download process watch the video Click Here

Here are below Orient LED TV Firmware For Free Download:

• ORIENT LE-24F6562-Normal-Seedha-Software
• ORIENT LE-24F6568-Software
• ORIENT LE-24G6510-Software
• ORIENT LE-24G6533-Software
• ORIENT LE-29E6063-Software
• ORIENT LE-29F6502-Software
• ORIENT LE-29F6508-Software
• Orient LE-32E5000-Software
• ORIENT LE-32E6063-Software
• ORIENT LE-3266500-Software
• ORIENT LE-3266508-Software
• ORIENT LE-32G6510-Software
• ORIENT LE-32G6511-Software
• ORIENT LE-32G6533-Software
• ORIENT LE-32G7061-Software
• ORIENT LE-32L4143-Software
• ORIENT LE-32L6360-Software
• ORIENT LE-40E6068-Software
• ORIENT LE-40E6982-Software
• ORIENT LE-40F6508-Software
• Orient LE-40F6511 Software
• ORIENT LE-40G6520-Software
• ORIENT LE-40G6521-Software
• ORIENT LE-40G6530-Software
• ORIENT LE-40G7061-Software
• ORIENT LE-40L6010-Software
• ORIENT LE-40L6951-Software
• ORIENT LE-40L6981FHD-Software
• ORIENT LE-43G6530-Software
• ORIENT LE-43G6533-Software
• ORIENT LE-50F6510-Flip-Ulta-Software
• ORIENT LE-50F6510-Normal-Seedha-Software
• ORIENT LE-50G6520-Software
• ORIENT LE-50L8082-2MB-Software
• ORIENT Leopard-32 HD Black-Software
• ORIENT Macaw-32HD BLACK
• ORIENT MS0V590-ZCO1-01 Tuner R842
• ORIENT MS0V591-ZCO1- 01 Tuner R842
• ORIENT MSTV2407-ZCO1-01-1366×768
• ORIENT MSTV2407-ZCO1-01-1920×1080
• ORIENT Panther-32-HD-Black Software
• Orient LE-19F6568-Software
• Orient LE-24F6510-Software
• Orient LE-24F6511-Software
• Orient LE-24F6568-Software
• Orient LE-24G6530-Software
• Orient LE-29E6502-Software
• Orient LE-29F6510-Software
• Orient LE-29F6511-Software
• Orient LE-32F6502-Software
• Orient LE-32F6508-Software
• Orient LE-32F6510-Software
• Orient LE-32F6511 Software
• Orient LE-32L6981-Software
• Orient LE-32L6982-Software
• Orient LE-40L6360 Software
• Orient LR-32G6530-Software
• ORIENT 40-Cheetah-FH D-Software
• ORIENT Cougar-32HD Black-Mirror
• ORIENT Cougar-32HD Black-Normal
• ORIENT Falcon 32 HD Black-Software
• ORIENT Hawk-32-H D-Black-Software
• ORIENT LE-19F6568-Software
• ORIENT LE-22E5000-Software
• ORIENT LE-22 E5017-Software
• ORIENT LE-22F6562-Software
• ORIENT LE-24E5000-Software
• ORIENT LE-24E6568-Software
• ORIENT LE-24F6562-Flip-Ulta-Software

CV628H-T42 Smart TV Board

CV628H-T42 is a Full HD (1080P) three-in-one Smart Android LED TV Board that Can support a Digital Tuner. CV628H_T42 has digital tuners of DVB-T / T2 and DVB-C standards that provide reliable reception of analog and digital channels. It has also the availability of wired and wireless Internet access. It has a high-speed USB 3.0 port. CV628H-T42 has multiple HDMI and USB interface Inputs. HDMI interface is responsible for the optimal quality of the video content when interacting with various devices.

The VGA connector allows you to use your TV as a monitor, and there are USB2.0 and USB3.0 ports for playing HD video, audio files, and photos from removable media and updating software. It can support 32-65-inch screen panels.

General Specifications:

Brand/Mark: Three-in-One Network Smart LED TV Board

Main Board: CV628H-T42

OS: Android 4.4

CPU: Dual Core

Back Light Ratings: 65v-90v 350mA  to 600mA

Ram: 512 Mb DDR

Rom: 4 Gb eMMC

Input Signal: DVB-T, DVB-T2, DVB-C

Inputs: AV, Component, VGA, HDMI x2, USB x3, Ethernet (RJ-45), Wi-Fi 802.11n, Miracast (optional)

Resolution: up to 1920×1080

Audio Output: 16 W (2×8 W)

Service Code:

Menu+1147

Note: The following given software/firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download all parts of the following given firmware/software and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here

How to Load Software:

1. Transfer the required resolution file into the Empty FAT32 USB Disk
2. Plugin the U-Disk into USB interface on Main Board
3. Keep Pressing the Power/Standby button and Switch ON the Power
4. Wait until the led light starts flashing, then release the power button
5. Note: USB file must be the name of “CtvUpgrade.bin”

CV628H-T42 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

T.R83.671 LED TV Combo Board

T.R83.671 FHD three-in-one LCD Driver Card LED Display Screen TV Card with Dual AV. T_R83_671 can support up to 1920×1080 screen panel resolution. The USB interface can be used for software Upgrades and Multimedia Playback functions.

Basic Info:

Model No. T.R83.671 (Combo Board)

Main Chipset: RDA8503

LED Backlight: 220mA to 300mA

Display Format: up to 1920×1080

Panel Supported: 18.5″ t0 24″

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: English,Hindi,Simplified , Chinese,Khmer,Myanmar,French, German,Italian,Spanish

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohm)

Panel Voltage: 5V, 12V

Backlight: 18V-60V/15w

USB Port: USB interface for Firmware Upgrade and Multimedia Playback Support

Electrical Parameters:

Working Input Voltage: AC 220V

Maximum Current: 3000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

Factory Service Mode:

Menu+1147

For Multi-Resolution:

Service menu input 336
Input 03661
Input 03662
1366×768
1920×1080

T.R83.671 Firmware  for Free Download Here :

For video tutorials, visit “Kazmi Elecom” my youtube channel.

M53V5.1 Universal TV Board

M53V5.1 is an analog universal LCD/LED TV Controller Driver Board. It can support Multi-Language with Russian also. M53V5.1 can support Full HD 1920×1080 resolution panels with a screen size of 8 inches to 42 inches. Its USB interface can be used to upgrade programs as well as can be used to play Video /music/photos Basically all formats are supported.

You can also set boot display images or LOGO and the Mirror option is also available on this board. Its inbuild software can support multiple screen resolutions with remote coding, So there, No need to load software in it.

Basic Info:

Model No. M53V5.1

Main Chipset: TSUMV53RUUL-Z1

Tuner: RDA5160

Display Format: up to 1920×1080

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: LVDS Single 6/8, Double 6/8

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Russian, English, Simplified Chinese, French, German, Italian, Spanish. Deutsch, Arabic

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 5 Watt (8 ohms)

Panel Voltage: 3.3V/5V/12V DC (jumping setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Backlight Option: Yes

Mirror Option: Yes

Capture Logo: Yes

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 3.5 Amp

Standby Power: <0.2W

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Insert the firmware into a formatted USB flash disk (FAT32).
2. Insert the USB disk and Connect the 7KEY-Button to the board
3. After turning on the power, then the 7key button light will be red flash red faster.
4. LED CONTINUES TO BLINK AND NEVER STOP. is normal, just wait about 1 minute, and that means the update has been completed. Then unplug and remove the u-disk.
5. Note: that the writing program does not lack power, crashing will not able to use

Factory Service Mode:

Input 2580

Note: The following firmware collection is a USB boot file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware Files:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. For more details about the download, process watch the video Click Here

M53V5.1 Firmware All resolutions Free Download Here :

S368A1.5 New Software Update Multi-Resolution & Multi Remote Control

TP.VST59.PB753 Universal LCD/LED TV Board 

TP.VST59.PB753 is an analog universal type LCD/LED TV Controller Board that is designed for full HD panels. TP_VST59_PB753 is a combo board and no need to attach an inverter and separate power module that is already builtin into this board. TP-VST59-PB753 can support 19 to 26-inch screen panels. Its USB interface can perform two functions Loading software and playing Multimedia files as well.

Basic Info:

Model No. TP.VST59.PB753 (Combo Board)

Main Chipset: TSUMV59XU-Z1

LED Backlight: 220mA to 300mA

Display Format: up to 1920×1080 Full HD

Panel Supported: 19″ t0 26″

Aspect Ratio: 4:3, 16:9 & 16:10

Electrical Parameters:

Working Input Voltage: AC 220V

Maximum Current: 3000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

Factory Service Mode:

Menu+1147

Note: The following firmware is a dump backup. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download the following firmware and then extract you will get the folder. Now load the file by a programmer. For More Detail about the download, process watch the video Click Here

TP.VST59.PB753 Firmware Free Download Here :

LAD.MV9.R LCD/LED Controller Board

LAD.MV9.R is an analog LCD/led tv board that is designed for an LCD/LED HD TV Board that supports the screen size of 32″ to 42″. This is three in one motherboard that has the main power module and Inverter module in a single piece of a motherboard. It is best with its interfaces like Dual AV, HDMI input, Dual USB interface, PC Input with audio, and Headphone jack. It has 30 pins LVDS Connector screen cable and has 4Mb program storage memory.

General Specifications:

Brand/Mark: China Universal HD Three-in-One Board

Model: LAD-MV9-R

Product: LED TV

LED Backlight Current: 300mA*2

Flash IC: 4Mb

Screen supported: 32-42 inch

Resolution: Up to 1920×1080

Panel Voltage: 12V

Power Input: 220V AC

Service Code:

Menu+710

Note: Most files are read and saved with the programmer and will be loaded by a programmer.

Following firmware collection is a Backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware File:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

LAD.MV9.R firmware for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

ZP.VST.59S.P813 Triple LED TV Board

ZP.VST.59S.P813 is an analog LCD/LED TV Motherboard that is suitable for the Asia Pacific and the Middle East countries. ZP_VST_59S_P813 is a triple board which is a backlight driver inverter, power supply unit, and ATV module builtin into a single printed circuit board. Its USB interface/port can be used for multimedia playback and for updating programs as well.

General Specifications:

Brand/Mark: China Universal

Model: ZP.VST.59S.P813

Product: LED TV

Resolution: Up to 1920×1080

Backlight: 70v / 466mA , 90v / 500mA

Service Code: Menu+1147

Note: The following firmware is a USB Boot/dump backup. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware Files:

Download the following firmware and then extract you will get the folder. Now load the file by a programmer. For More Detail about the download, process watch the video Click Here

Here are below some ZP.VST.59S.P813 firmware free download:

TP.RD8503.PB824

ATV Driver Motherboard TP.RD8503.PB824 is a basic board designed for LCD/LED televisions. Support for Full HD LCD/LED panel screens is its intended use. The Middle East and Asia Pacific regions are good fits for this board. The Combo Board is a three-in-one device. This motherboard has an integrated ATV card, LED backlight inverter circuit module, and main power module. According to the most recent user needs, this board includes all the functionality and connectivity ports needed, including HDMI, USB, PC, component, TV, and optional scart connectors.

Multimedia files can be played and software and firmware updates can be performed via its USB interface. Additionally, earphone output is supported. The LCD LED TV controller board TP.RD8503.PB824 has a maximum resolution of 1920×1080 and supports Full HD. It is compatible with FHD and 24–30-inch HD panel screens. Mstar is the manufacturer of the primary processor, which has excellent graphics. The firmware files for TP.RD8503.PB824 is provided below for the benefit of the technician.

General Specifications:

Brand/Mark: CXEL/China Universal

Model: TP.RD8503.PB824

Main Chipset: RDA8503

Product: LED TV Driver Board

Resolution: Up to 1920×1080

Panel: 24″ to 30″

Panel voltage: 5V,12V

Input Supply: 220V AC

Backlight: 45-65V 35w

Speaker Output: 2x5W

Service Code: Menu+1147

Note: The following firmware is USB bootable and a backup file that can be loaded by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first. Always keep a backup before writing the flash

For video tutorials, visit “Kazmi Elecom” on my YouTube channel.

TP.RD8503.PB824 firmware for free download:

• TP-RD8503-PB824_1366x768_General_USB
• TP-RD8503-PB824_1920x1080_General_USB

CV512H-H42 LED TV Board

CV512H-H42 is a simple ATV & DTV Driver Motherboard designed for LCD/LED TVs. CV512H.H42 board is suitable for the European markets.CV512H_H42 is a Combo Board. The main power module and LED Backlight Inverter Circuit module and ATV Card are builtin into this motherboard. CV512H H42 has all the features as per the latest requirements like HDMI input, USB interface, Component Input, TV, and Scart.CV512H-H42 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: CV512H-H42

Main Chip:

Product: LED TV

LED Backlight: V

Backlight Current: 600mA

Flash IC: 8Mb

Screen supported: 32-43 inch

Resolution: Up to 1920×1080

AUDIO: RDA3118E28

Tuner Type: ATV and DTV (DVB-T MPEG4, DVB-C, DVB-T2, DVB-S2)

Tuner: CDT-9NT372-RD60 & CDT-9NS161-RD41

Panel Voltage: 5V, 12V

Power Input: 220V AC

Memory: 8Mb SPI Flash

Firmware Name: RDA_533.bin

Service Code:

Source/Input+2580

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware Files:

Download all parts of the following firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

CV512H-H42 firmware for free download:

TP.VST59.P63 LED TV Board

TP.VST59.P63 is a universal led tv driver board that is suitable for 32-inch panels and others. TP_VST59_P63 is three in one board that is backlight inverter, main power supply, and logic board are builtin into a single piece of PCB which is why it is called a combo board. Its USB interface can play Multimedia and also we can load the program through it.

General Specifications:

Brand/Mark: China Universal

Model: TP.VST59.P63

Main Chipset: TSUMV59XU-Z1

Product: LED TV

Backlight: 45 to 65v 350mA 35w

Panel Voltage: 5v, 12v

Board Power Input: 220v AC

Resolution: Up to 1920×1080

Screen Supported: 26 to 46 inch

Service Code: Menu+1147

Note: The following firmware is a dump backup. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download the following firmware and then extract you will get the folder. Now load the file by a programmer. For More Detail about the download, process watch the video Click Here

Here are below some TP.VST59.P63 firmware free download: