MIRCP45-M6V1.0 LED TV Board
MIRCP45-M6V1.0 is a simple ATV driver motherboard for LCD/LED TV. It is said to support a full HD LCD/LED screen. This board is suitable for the Asia Pacific and Middle East markets. It is a 3-in-1 combo board. The main power module, LED backlight inverter circuit module and ATV card are integrated into this motherboard. This board is equipped with all the functions and connection ports as per the latest user requirements such as HDMI input, USB interface, PC input, component input, TV, and Scart (optional).
USB interface can be used for software/firmware updates and multimedia file playback. Headphone output is also supported. MIRCP45- M6V1.0 is a full HD LCD LED TV controller card with a maximum resolution of 1920 x 1080. It supports HD and FHD screens from 28 to 48 inches. The main processor is from Mstar and the graphics are good. To assist technicians, the MIRCP45-M6V1.0 firmware file is provided below.
General Specifications and Features:
Brand/Mark: Universal Board
Model: MIRCP45-M6V1.0
Main Chip:
Product: LCD/LED TV
LED Backlight: mA
Flash IC: Mb
Sound Chip:
Tuner IC:
Screen supported: inch
Resolution: Up to 1920×1080
Panel Voltage: 5V, 12V
Power Input: 220V AC
Firmware Name:
Firmware Type:
Service Code:
Source/Input
Note: The following firmware is USB bootable and a backup file that can be loaded by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first. Always keep a backup before writing the flash.
MIRCP45-M6V1.0 firmware for free download:
