RSAG7.820.1588 LED TV Board
RSAG7.820.1588 is a simple ATV motorist Motherboard intended for TV/ LED TVs. This board is suitable for the Asia Pacific and the Middle East requests. It’s designed to support Full HD TV/ LED Panel defenses. This is a Non-Combo Board. For complete setup, the power input module and LED Backlight Inverter motorist Circuit module are needed independently but ATV Card is erected into this motherboard. This board has all the features and connectivity anchorages as per the rearmost conditions like HDMI input, USB interface, PC input, element Input, television, and Scart( voluntary).
The USB interface of RSAG7.820.1588 can be used for streamlining software/ firmware and for playing multimedia lines as well. It can also support Earphone affair. RSAG 7.820.1588 is a Full HD- HD-supported TV LED television regulator board with a maximum resolution of 1920×1080. It can support 28-inch to 48-inch HD and FHD panel defenses. The main processor is made by Mstar and its plates are also good. RSAG 7.820.1588 firmware lines are given below for the technician’s support.
General Features and Technical Specifications:
Brand/Mark: Universal Board
Model: RSAG7.820.1588
Main Chip:
Product: LCD/LED TV
LED Backlight: mA
Flash IC: Mb
Sound Chip:
Tuner IC:
Screen supported: inch
Resolution: Up to 1920×1080
Panel Voltage: 5V, 12V
Power Input: 12V DC
Firmware Name:
Firmware Type:
Service Code:
Source/Input
Caution:
All the images and specification details related to RSAG7.820.1588 in this post is for reference only. If you’re a stoner and do n’t have any experience of repairing also it’s better to visit the nearest technician first without loading the software/ firmware. occasionally, the fault is different as per the visual compliances. So, please do n’t try it at home.
RSAG 7.820.1588 Board Replacement:
If the board is fully dead and no chance to repair also replace the same board as formerly installed. And if the same board is n’t available on the request also search for the board that has the same specifications and rearmost features to avoid any difficulties. If the backlight module is defective in the quintet board also you can install only the backlight module independently also no need to change the whole board.
Note: The following firmware is USB bootable and a provisory train that can be loaded by a programming tool. Kazmi Elecom Team is n’t responsible for any type of damage/ loss as a result of uploading/ downloading the firmware. First, check and corroborate the main board also install software. However, or facing any issues during firmware installation also visit and read them first, If you’re new and do n’t have enough knowledge of lading/ installing software/ firmware or dump lines. Always keep a backup before writing the flash.
RSAG7.820.1588 firmware for free download:
For video tutorials, visit “Kazmi Elecom” on my YouTube channel.
