SKR.03 Universal LCD/LED Board
SKR.03 is an analog LCD/LED TV universal driver board. It is suitable for Asian markets as well as middle east markets. SKR_03 can support resolution up to 1920×1080. Its USB slot can be used for updating software and playing multi-media, such as Movie, MP3, and Photo. And you can also set a boot logo image. SKR-03 has a mirror display option also in it.
Model No. SKR.03
Main Chipset: RDA 8501
Display Format: up to 1920×1200
Aspect Ratio: 4:3, 16:9 & 16:10
Capture Logo: Yes
Mirror Display: Yes
General Specifications:
TV System: PAL/SECAM/NTSC
Panel Interface: Single channel or Dual channel LVDS
Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power
Multi-Language OSD: Yes
Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out
Audio O/P Power: 2 x 3 Watt (8 ohm)
Panel Voltage: +3.3V/+5V/+12V DC
USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)
Electrical Parameters:
Working Input Voltage: DC +12 Volt
Maximum Current: 2000mA (Without Panel)
Standby Power: <0.2W (for motherboard only)
Maximum Current for USB: 500mA
How to Upgrade Firmware:
- Copy the Required Firmware/software “SKR_100.bin” in FAT32 USB Disk
- Plug in the U disk into the Mainboard USB port of the TV
- Switch ON the power and Wait even IR indicator led start flashing (Red and Blue) and stop flashing
- Done. Unplug the Udisk (It will take max 1 minute to finish the upgrade process)
Factory Service Mode:
Menu+1147 For more Service Menu Codes visit Here.
SKR.03 Firmware All resolutions Free Download Here :
- SKR-03-800×600-Firmware-USB
- SKR-03-1024×576-Firmware-USB
- SKR-03-1024×600-Firmware-USB
- SKR-03-1024×768-Firmware-USB
- SKR-03-1280×800-Firmware-USB
- SKR-03-1280×1024-Firmware-USB
- SKR-03-1366×768-Firmware-USB
- SKR-03-1400×1050-Firmware-USB
- SKR-03-1440×900-Firmware-USB
- SKR-03-1600×900-Firmware-USB
- SKR-03-1600×1200-Firmware-USB
- SKR-03-1680×1050-Firmware-USB
- SKR-03-1920×1080-Firmware-USB
- SKR-03-1920×1200-Firmware-USB
