T.MS6308.801 Firmware
T.MS6308.801 is a simple ATV Driver Motherboard intended for LCD/LED TVs. It is designed to support Full HD LCD/LED Panel Screens. This is a Non-Combo Board. For complete setup, the power input module and LED Backlight Inverter driver Circuit module are required separately but ATV Card is built into this motherboard. This board has all the features and connectivity ports as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart (optional).
Its dual USB interface is useable for user convenience to play multimedia files of his own choice and software upgrade purposes. It can also support Earphone output. T.MS6308.801 is a Full HD-supported LCD LED TV controller board with a maximum resolution of 1920×1080. It can be installed for 32 to 42-inch FHD and HD panel screens. The main processor is made by Mstar and its graphics are also good. T.MS6308.801 firmware files are given below for the technician’s support.
General Specifications:
Model: T.MS6308.801
Resolution: 1920×1080
Panel: v500hj1-pe8
Flash: Nand Flash
Firmware Type: USB Upgrade
Firmware Name: AllUpgrade_6308RTEC.bin
Product: Bush, Polaroid
Service Code:
Source/Input
Caution:
All the pictures and specification details related to T.MS6308.801 in this post is for reference only. If you are a user and do not have any experience of repairing then it is better to visit the nearest technician first without loading the software/firmware. Sometimes, the fault is different as per the visual observations. So, please do not try it at home.
Note: The following firmware is USB bootable and a backup file that can be loaded by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first. Always keep a backup before writing the flash.
How to Download:
Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here
T.MS6308.801 firmware for free download:
