Tag Archives: TP.MS338.PB819 firmware

TP.MS338.PB819 Firmware Free Download

TP.MS338.PB819 Universal Smart Board

TP.MS338.PB819 is a universal smart integrated board with an Android wifi network function. TP MS338 PB819 is a three-in-one network Driver Wi-Fi board that can support up to 28 to 42-inch screens. TP_MS338_PB819 can be equipped with various screens. TP.MS338 PB819 Smart Board has multiple ports A/V, USB interface Ports, and many HDMI ports as well in addition to VGA, Scart, and Earphones. TP.MS338-PB819 has a LAN/RJ45 Connector interface port also for the wired internet network.

TP_MS338_PB819 is a Combo Network Triple play board that has a Digital TV tuner built-in in it. The Graphics and Sound quality of the TP.MS338-PB819 android board are very good and the Response rate is very efficient.  TP.MS338.PB819 firmware is available for technician support.

Tp.ms338.Pb819_Firmware

General Specifications:

Brand/Mark: FHD Smart LED TV Main Board

Main Board Model: TP-MS338-PB819

Main Chipset: DTMB: MSD6A338ST-WL OR MSD6A338ST-003J

OS: Android 4.4

CPU: A7*2

CPU Frequency: 1GHz

GPU: Mali400*2

GPU Frequency: 550MHz

Ram: 512 Mb

Rom: 4 Gb eMMC

Backlight: 30v to 160v 48w, 300mA

Audio Output: 2x8w

Resolution: upto 1920×1080 (28” to 42″)

Service Code: Menu+1147

Firmware: allupgrade_msd338_4G_1G_ref30. Bin

Firmware Type: USB Updateable Firmware, TP.MS338.PB819 program data USB

Note: The following firmware is USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here

How to Install:

  • Copy the .bin file into the USB disk
  • Connect the U-Disk to TV
  • Switch on the TV
  • Standby lights start flashing. when the light flashing speed increases it means it is complete.
  • Switch OFF, Remove the Disk, and Switch ON again. Done

TP.MS338.PB819 firmware for free download:

Kazmi-Elecom

error: Content is protected !!