Tag Archives: Tp Ms608 Pb831 Firmware

TP.MS608.PB831 Smart LED TV Board

TP.MS608.PB831 is designed for a Network function Analog and Digital TV Control Board which is suitable for Asian Markets and the Middle East as well. TP_MS608_PB831 supports the screen size of 32″ to 42″. This is a three-in-one motherboard integration of the main power module, LED Backlight Driver/Inverter module, and TV Module in a single piece of a motherboard.

TP-MS608-PB831 is best with its interfaces like Dual AV/Component, Dual HDMI input, Dual USB interface slot that can be used for Software upgrade and multimedia playback, PC Input with audio and Headphone jack, and Rj45 network interface supports 10/100M auto-identification and DHCP. TP MS608 PB831 supports ATV and DTV with the standard DTMB supports.

General Specifications:

Brand/Mark: China Universal Smart WIFI Network Drive Board

Main Board: TP.MS608.PB831

Main Chipset: MSD6A608HTAB-Z1, ATBM8880（DTMB）

Tuner Chip: R840

Panel Volt: 12v

Audio Output Power: 2x8w(8Ohm)

OS: Android 4.0

CPU: Dual Core

Size: 18.5 * 21 cm

Ram: 512 Mb DDR

Rom: 2 Gb eMMC

Resolution: up to 1920×1080

Screen Size Supported: 26″ to 47″

Power AC Input: 100~240V/75W

Service Code: 1147

Note: TP.MS608.PB831TP.MS608.PB831 with backlight power under 45W, and backlight voltage between 30 V-160V. Following the given firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of your required resolution and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here

How to Update:

1. Put the mboot.bin + MstarUpgrade.bin files into USB Disk
2. Plugin the USB Disk into USB Interface Port of Main TV Card
3. Press Volume+ button When power on the TV
4. Wait for the LED light Flashing
5. If the LED light starts flashing, it means TV is entered in Upgrade Mode and Upgrade screen will appear
6. Within in 2 minutes, the process will be done and tv will go to standby mode.

TP.MS608.PB831 firmware for free download:

TP.MS608.P83 Smart LED TV Board

TP.MS608.P83 is designed for a Network function Analog TV Board which is suitable for Asian Markets and the Middle East as well. It supports the screen size of 26″ to 47″. This is a three-in-one motherboard integration of the main power module LED Backlight Driver/Inverter module and TV Module in a single piece of a motherboard.

It is best with its interfaces like Dual AV/Component, Dual HDMI input, Dual USB interface slot that can be used for Software upgrade and multimedia playback, PC Input with audio and Headphone jack, and Rj45 network interface that supports 10/100M auto-identification and DHCP. TP.MS608.P83 supports ATV and DTV with the standard DT supports.

General Specifications:

Brand/Mark: China Universal Smart WIFI Network Drive Board

Main Board: TP.MS608.P83

Main Chipset: MSD6A608HTAB

Panel Volt: 5v/12v

Audio Output Power: 2x8w(8Ohm)

OS: Android 4.4

CPU: Dual Core

Size: 18.5 * 21 cm

Back Light V/C : 90v-100v 520mA 45w

Ram: 512 Mb DDR

Rom: 4 Gb eMMC

Resolution: upto 1920×1080

Screen Size Supported: 26″ to 47″

Power AC Input: 100~240V/75W

Service Code: 1147

Note: The following given software/firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of the following given firmware/software and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

How to Update:

1. Download all parts and then extract any one of them and copy the upgrade file into USB Disk
2. Plug the USB Disk into the USB Interface Port of the Main TV Card
3. Press the Volume+ button When powering on the TV
4. Wait for the LED light to flash
5. If the LED light starts flashing, it means the TV is entered in Upgrade Mode and Upgrade screen will appear
6. Within in 2 minutes, the process will be done and the tv will go to standby mode.

TP.MS608.P83 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my YouTube channel.