6681M2C1 Smart Android Board
6681M2C1 is a combo three-in-one FHD LED TV Android Board. It supports a 1920×1080 Full HD resolution and a Refresh Rate of 60 hertz. It has multiple connectivity input interfaces for the user, such as dual HDMI input ports to connect external STB (set-top box), Blu-ray players, and gaming consoles. It has more than one USB port to connect portable hard disk drives and other USB devices, and users can play multimedia files as well through these USB input interfaces. RCA interface is available for RGB connectivity. The SCART interface is also available on this board. LAN connection for wired internet connectivity.
It has Dolby Digital and DTS support, 20 watts of sound output, and HDR Display viewing. 6681M2C1 can support Smart TV features such as Android and the Google Play Store. 6681M2C1 firmware files are given below for free of cost download to support technicians for rectification of LED TV Software problems. The Backlight driver controller board and Main Power Input Circuit module are built into this board, with the addition of dual tuner ATV and DTV. This board has Android version 9.0 with 1GB RAM and 8 GB ROM.
Technical Features & Specifications:
Brand: China
Board Model: 6681M2C1
Display Format: FHD 1080P
Screen Type: LED
Features Format: Smart
OS Version: Android 9.0
Chipset: MSD6681BQHA
Processor: ARM Cortex
Graphic Processor: Quad-core
RAM Capacity: 1 GB DDR3
Storage Memory: 8 GB ROM
Screen Resolution: 1920×1080
No. of HDMI Ports: 2
No. of USB Ports: 2
Wi-Fi Type: Wi-Fi
Built-In Wi-Fi: Yes
Ethernet (RJ45): Yes
Speaker Output RMS: 20W (10W*2)
Tuner: ATV & DTV (DVB-T2, DVB-C, DVB-S2)
Power Requirement: AC 110 – 240 V, 50/60 Hz
Power Consumption: 120 W
Firmware Type: USB Update and EMMC Backup Dump
EMMC: KLM8G1GETF-B041
Firmware Name: 6681_DVBT_8G.bin, 358_DVBT_8G.bin
Product: Premier, Goldstar, PEL, TELEFUNKEN, LEADER
Service Menu: Menu 8202, Menu 2013
Caution:
All the Images, features, and specifications shared in this post related to board 6681M2C1 are for reference only. If the user does not have any repair knowledge or experience, then he should go to the nearest expert technician and not try to repair or install firmware. Sometimes, the user thinks that there is a software issue, but maybe it is something else. It may be a hardware issue. If the Android LED TV is in standby mode, it shows a hardware fault, and if it hangs on the logo, then it may be a software/hardware fault. If the Smart LED TV is slow and some applications are not performing well, then the user can do a factory reset.
6681M2C1 EMMC Backup:
This board has an 8GB eMMC memory capacity. The user can read the EMMC backup files by Pen drive, but to rewrite an eMMC backup, the user should JTAG the mainboard 6681M2C1 and rewrite by a programmer or special ISP tool. Be careful when writing the eMMC backup file: if the board is on standby light due to wrong software or incomplete installation, then the user can rewrite the backup; otherwise, it is on standby or red light due to hardware issues. So, first, diagnose the fault. In this case, no need to write the eMMC backup.
Note: The following software is a USB bootable and EMMC backup file. Kazmi Elecom Team is not responsible for any damage/loss caused by uploading/downloading the firmware. First, check and verify the main board, then install the software. If you are new and lack knowledge of loading/installing software/firmware or EMMC backup files, or are facing any issues during firmware installation, then visit and read here first.
6681M2C1 Firmware for free download:
