6681M6C1 Smart LED TV
6681M6C1 is a smart Android triple-play network LED TV driver controller motherboard. It has a dual-tuner option for analog TV signal reception (ATSC/NTSC) and Digital TV signal reception (DVB-S/S2). This board is a Combo board. This is a three-in-one board and has the main power input module built into the main PCB with the TV tuners and Backlight LED inverter module. The storage memory capacity of this board is 8GB eMMC NAND Flash. The supported resolution of this board is Full HD 1920×1080 (1080p) pixels.
6681M6C1 LED TV Board has multiple user connectivity interfaces such as SPDIF for digital audio output amplification and dual HDMI inputs for connecting digital Full HD devices like Blu-ray players, STBs, Gaming consoles, Digital cameras, etc. For connecting analog devices, this board has the facility of RCA input ports. With dual USB ports, the user can connect external hard disk drives, play multimedia files, and use them for software upgrade purposes. To get fast internet results for browsing and internet surfing, this board has a wired connectivity option with a LAN port.
General Information:
Model Name: 6681M6C1
Main Chipset: 6681
Android Version: 9.0
Resolution: 1920×1080
Processor: Quad-Core
RAM: 512 MB/1 GB
ROM: 8 GB EMMC
EMMC: KLM8G1GETF-B041
Aspect Ratio: 16:09
Audio Power Output: 12w (6×2)
System: PAL//SECAM/NTSC
Tuner: ATSC/NTSC
Digital Tuner: DVB-S2
HDMI: 2
USB Ports: 2
VGA: No
SPDIF: Yes
SCART: No
CI+=Yes
LAN: Yes (RJ45)
Firmware: 6681_DTMB_8G.bin
Firmware Type: EMMC Backup Dump and USB bootable
Note: The following 6681-M6C1 firmware is a backup dump file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board, then install the software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or are facing any issues during firmware installation, then visit and read here first.
6681M6C1 Firmware files for free download:
