A9K81G Firmware Free Download

A9K81G UHD Smart Board

A9K81G is a UHD smart LCD LED TV Driver Controller motherboard. The supported resolution of this board is 3840×2160, with a maximum of 2160p Ultra High Definition. This board is suitable for 43-inch to 65-inch LCD LED TV screen panels. This board is a combo board. LED backlight driver inverter module and the main power input circuit module are built into a single PCB. MediaTek makes the main processor of this board, which is the ARM Cortex quad-core CPU. Its storage (ROM) capacity is 16 GB EMMC Flash memory.

A9K81G is a 4K universal smart Google TV board with multiple user connectivity interfaces, such as three HDMI input ports for High-Definition video and audio input and dual USB input ports for media playback and software upgrades. It has an Antenna port for cable connection. This board has a 3.5mm jack as a service for technicians. It has an SPDIF optical interface for high-definition surround sound audio output. This board also has a composite interface for SD audio and video input. LAN port is also available for a high-speed Ethernet network connection.

A9K81G

General Information and Specifications:

Board Model: A9K81G N012406-002340-003 N012406-002340-004 VER00.02

Main Chipset: MediaTek

CPU: Quad-Core ARM Cortex-A53 64-bit

GPU: Mali-450 MP3

Operating System: Google TV

Resolution: 3840×2160

Audio Power: 2x10W (20 watts 8 ohm)

Backlight Voltage: 90-102V

Backlight Current: 570mA

Backlight Power: 180W2

USB Ports: 2

HDMI Ports: 3

CI: No

Component: Yes

RJ45: Yes

Tuner: NTSC/PAL

Wifi: Yes

Miracast: Yes

Memory (RAM): 2 GB DRAM

Storage (ROM): THGBMFG7C1LBAIL 16 GB EMMC Flash

Power Rating: 100V~240V 50/60Hz

Power Consumption: 120 W

Firmware Name: upgrade_image_no_tvcertificate.pkg

Firmware Type: USB bootable Update File

Product Users: Skyworth, Thomson, Hyundai, Realme, Panasonic

A9K83G

Note: The following firmware is a USB bootable and EMMC backup dump file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board, then install the software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or are facing any issues during firmware installation, then visit and read here first.

A9K81G Firmware files for free download:

Kazmi-Elecom

Leave a Reply

Your email address will not be published. Required fields are marked *

error: Content is protected !!