TP.V56C.PB819 Software Free Download

TP.V56C.PB819 LCD/LED TV Board

TP.V56C.PB819 is an analog LCD/LED TV ATV control card that is designed especially for Asian countries and the Middle East as well. TP-V56C-PB819 is a combo, three-in-one card with Dual AV that is designed for the power supply unit and Inverter board with ATV Module three in one embedded board. TP_V56C_PB819 supports 24 to 37-inch screens up to a resolution of 1920×1080.

General Specifications:

Brand/Mark: China Universal

Model: TP.V56C.PB819

Main Chipset: V56

Product: LED TV Driver Board

Resolution: Up to 1920×1080

Panel: 24″ to 37″

Panel voltage: 12V

Input Supply: 100 to 240V AC

Motherboard power: 48W

Backlight: 45-63V 25w

Backlight current: 480mA

Speaker Output: 2x5W(8ohm)

Service Code: Menu+1147

For updating software, you can use not only the USB interface but USB interface also the ability to play Movies/music/photos, Many formats are supported.

How to Programm:

1. Copy the required program or software to the USB-Disk drive
2. Insert the USB flash drive into the USB interface port on the main board
3. Connect the keyboard and power on the switch, until you see the indicator on the keyboard flashing in red and green, until the indicator flashing stops then turn off the power, then Pull out the USB flash drive, and power it on.

Note: 

All Backup or Dump files can be loaded by the programmer. Can not upgrade by USB interface. All files are tested by myself. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of the following given firmware/software and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

TP.V56C.PB819 firmware free download:

For video tutorials, visit my youtube channel.